Page 1
24-hour/Weekly Time Switch Up to 96 ON/OFF Cycles from DIN-sized (72 x 72 mm) Timer • Easy setting with color-coded programming tabs. • Choose 24-hour or 1-week models with either SPST-NO or SPDT control outputs. • Minute dial assures accurate settings. •...
Ordering Information Mounting method Control output 24-hour operation 1-week operation Synchronous motor Quartz motor (with Quartz motor (with memory protection) memory protection) Flush SPST-NO H2F-D H2F-DM H2F-WM SPDT H2F-DC H2F-DMC H2F-WMC Surface/track SPST-NO H2F-DF H2F-DMF H2F-WMF SPDT H2F-DFC H2F-DMFC H2F-WMFC Accessories (Order Separately) Extra programming tabs 1 pair for each ON/OFF (see note)
Page 3
Characteristics Item 24-hour operation 1-week operation Synchronous motor Quartz motor ± 3 min max. ± 30 min max. Accuracy of operating time (see note 1) Influence of voltage Influence of temperature ± 3 min max. ± 30 min max. Setting error (see note 2) ±...
Page 4
Connections Synchronous Motor Model (SPST-NO Output) (SPDT Output) H2F-D H2F-DF H2F-DC H2F-DFC Quartz Motor Model (SPST-NO Output) (SPDT Output) H2F-DM/H2F-WM H2F-DMF/H2F-WMF H2F-DMC/WMC H2F-DMFC/WMFC Note: Connect an independent power source to the load. AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr 24-hour/Weekly Time Switch...
Page 5
Dimensions Note: All units are in millimeters unless otherwise indicated. Mounting Dimensions Surface Mounting: H2F-DF/-DMF/-WMF Track Mounting: H2F-DFC/-DMFC/-WMFC Mounting Holes M3.5 Two, M3 holes Screw size M3 x 45 (included) Flush Mounting: H2F-D/-DM/-WM/-DC/-DMC/-WMC 65.5 Panel Cutout Recommended panel thickness: 1 to 3.2 mm Note: The mounting adapter and screws are included.
Precautions Flush Mounting 3. If the lead wires have been connected to the timer from the front of the panel before the timer is mounted in the panel, engage the timer to part A of the adapter and push it in the direction of B. 1.
Manual Switch H2F-@M Series (Quartz Motor Models) SPST-NO Output Battery A 3-position selector switch, located at the lower left corner of the Remove the battery cover on the rear panel of the H2F, load the pro- front panel, determines output operation. In the OFF position, the vided Battery into the battery box, then turn ON the H2F.
Page 8
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. L013-E1-04 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company Industrial Control Components Division...