Xerox Phaser 3120 Service Manual page 17

3.10 SMPS
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
- Engine Shield Ass'y(see page 3-6)
2. Unplug one connector and remove three screws
then take the Inlet Ass'y out.
Inlet Bracket
Disassembly and Reassembly
3. Remove one screw and unplug one connector
from the Main PBA.
4. Remove three screws and take The SMPS out.
SMPS
Service Manual
3-7