3.6 Fan
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
2. Unplug the connector from the SMPS and
remove the one screw. Then take out the Fan.
3.7 Driver Ass'y
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 3-2)
2. Remove the six screws from the Drive Ass'y.
Disassembly and Reassembly
3. Unplug one connector from the Driver Ass'y
DC Fan
Drive Ass'y
Service Manual
3-5