For pulse counting, for example kWh metering, the BIM with enhanced pulse counting capabilities must be used.
Note: 1 BIM required in position P3 and 1 BOM required in position P4. Products B30 and C30 require an extra BIM in position P5.
IOM 8 inputs, RL
1MRK000173-CF
220-250 VDC,
110mA, 10+2
output relays
IOM with MOV 8
1MRK000173-GC
inputs, RL 24-30
VDC, 50mA, 10+2
output relays
IOM with MOV 8
1MRK000173-AD
inputs, RL 48-60
VDC, 50mA, 10+2
output relays
IOM with MOV 8
1MRK000173-BD
inputs, RL 110-125
VDC, 50mA, 10+2
output relays
IOM with MOV 8
1MRK000173-CD
inputs, RL 220-250
VDC, 50mA, 10+2
output relays
mA input module
1MRK000284-AB
MIM 6 channels
SOM static output
1MRK002614-CA
module, 6 heavy
duty static
outputs, 250 VDC
+ 6 output relays
Selection for
position #10
1)
These black marks indicate the maximum number of modules per casing type and the slots that can be occupied.
2)
Maximum 4 (BOM+SOM+MIM) boards. P5 not in B30/C30.
3)
P5 not in B30/C30
4)
Maximum 1 MIM in 1/2 case
5)
P5 not in B30/C30
6)
SOM must not to be placed in the position nearest to NUM: 1/2 case slot P5, 3/4 case 1 TRM slot P10, 3/4 case 2 TRM slot P7, 1/1 case 2 TRM slot P13, 1/1 case, 1 TRM slot