Advertisement
Using Your Food Processor
5. Place the small food pusher into
the small feed chute. (Fig. 5)
Fig. 5
6. Press the desired speed setting
button on the control panel
to begin processing. Choose
between LOW, HIGH and PULSE.
NOTE
Ingredients can be added
through the feed chute using the
food pushers while processing.
7. Once finished, press the 'OFF'
button to stop processing. Switch
the power off at the power outlet
and unplug the food processor
from the power outlet.
8. Unfasten the lid clips on the food
processing bowl lid and remove
the lid from the food processing
bowl.
9. Carefully remove the S-blade from
the processing bowl.
10. Lift the bowl off the motor base
using the handle and remove
processed food.
12
KFP655_IB_C20.indd 12
Using the Reversible Slicing/
Shredding Disc
NOTE
Make sure to remove the S-blade
from the processing bowl when
using the reversible disc for
processing.
NOTE
Handle the reversible disc using
the two finger holes provided to
avoid contact with sharp blades.
1. With the processing bowl secured
onto the motor base and the
S-blade removed, carefully place
the reversible slicing/shredding disc
onto the non-removable spindle.
(Fig. 6) Ensure the desired side of
the reversible slicing/shredding disc
is facing up. For example, to use
'SLICE', make sure the disc side that
has 'SLICE' printed on it is facing
upwards. The reversible slicing/
shredding disc will sit at the top
of the spindle near the top of the
processing bowl.
Fig. 6
17/4/20 12:12 pm
Advertisement
