Page 2
In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 2738 45 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz...
INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE At Kambrook, we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
Page 5
disassembling. Ensure the The food processor will not control button is in the ‘OFF’ operate unless properly assembled and the lid locked position and the food processor is switched off at the power into place. outlet and the power cord is •...
Page 6
Do not use the appliance if the power supply cord, plug, connector or appliance becomes damaged in anyway. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair. KFP655_IB_C20.indd 6 17/4/20 12:12 pm...
Page 7
• Any maintenance other than • Before cleaning, always turn cleaning should be performed the appliance to the OFF at an authorised Kambrook position, switch off at the power Service Centre. outlet, unplug at the power outlet and remove the power •...
Page 9
Components 1. Small food pusher 6. Processing bowl lid Used to push smaller food items 7. Non-removable spindle down the small feed chute or, when combined with the large food 8. 1.8L processing bowl pusher, to push larger sized food 9.
Using Your Food Processor BEFORE FIRST USE Assembling the Processing Bowl Before first use, remove and safely discard any labels. Ensure that you 1. Place the motor base on a flat, have all parts and accessories listed in dry surface such as a bench top. the components list before discarding Ensure that the motor base is the packaging.
Page 11
Using Your Food Processor Using the Chopping S-Blade NOTE The food processor will not NOTE operate unless the lid clips are locked securely on the Always ensure no buttons on the processing bowl. food processor are pressed in and the power outlet is turned off and unplugged before assembling the processor or inserting the S-blade or reversible...
Page 12
Using Your Food Processor Using the Reversible Slicing/ 5. Place the small food pusher into the small feed chute. (Fig. 5) Shredding Disc Fig. 5 NOTE Make sure to remove the S-blade from the processing bowl when using the reversible disc for processing.
Page 13
Using Your Food Processor 2. Lock the lid on to the processing 9. Unfasten the lid clips and remove bowl with the lid clips. the lid from the food processing bowl. Remove the reversible slicing/shredding disc. NOTE 10. Lift the processing bowl off the motor base using the handle and The food processor will not remove processed food.
Blade Guide Chopping S-Blade The cutting edge of this blade is extremely sharp and it should only be handled by the plastic spindle. INGREDIENTS PROCEDURE Onions, Vegetables, Fruits Cut ingredients into approximately 2.5cm cubes. Place in processing and Cooked Meats bowl, up to 750g at a time.
Page 15
Blade Guide Slicing Disc The slicing disc processes cooked meats and vegetables into thin slices with a large surface area. Always use the food pusher when using the reversible slicing/ shredding disc. INGREDIENTS PROCEDURE Onions Peel the onions and halve if too large to fit into the feed chute. Place the onions in the feed chute.
Care, Cleaning & Storage STORAGE Before disassembling, cleaning or storing, always switch the food All accessories should be stored processor off at the power outlet and inside the processing bowl and out then remove the power plug from the of the reach of children to avoid outlet.
Page 20
Kambrook - Australia Kambrook - New Zealand Ground Floor, Suite 2, 170-180 Bourke Rd Private Bag 94411 Alexandria NSW 2015, Australia Botany, Manukau Auckland 2163 Locked Bag 2000 New Zealand Botany NSW 1455 Customer Service Line/ Customer Service Line 1300 139 798...