Advertisement
Using Your Food Processor
Using the Chopping S-Blade
NOTE
Always ensure no buttons on the
food processor are pressed in
and the power outlet is turned
off and unplugged before
assembling the processor or
inserting the S-blade or reversible
disc.
1. With the processing bowl secured
onto the motor base, carefully
slide the chopping S-blade down
onto the non-removable spindle
located in the centre of the
processing bowl. (Fig. 2)
WARNING
The chopping S- blade is sharp!
Handle with care.
Fig. 2
2. Place food into the processing
bowl, ensuring it is cut to size (refer
to the Blade Guide). Align the lid
clips on the processing bowl lid
over the grooves found on the
processing bowl. Snap the lid clips
down to lock onto the bowl. (Fig. 3)
KFP655_IB_C20.indd 11
NOTE
The food processor will not
operate unless the lid clips
are locked securely on the
processing bowl.
3. Insert the power plug into a 230V
or 240V power outlet. Switch the
power on at the power outlet.
4. With the processing bowl lid
locked onto the processing bowl,
place the large food pusher into
the large feed chute. (Fig. 4)
Fig. 4
Fig. 3
11
17/4/20 12:12 pm
Advertisement
