Siemens SIMATIC HMI KTP400 Manual page 13

3 Mode of Operation
No. Action/response
5. Move the mouse pointer to the
output connection of one of the
function blocks you want to
connect and keep holding the
mouse button down.
Then, move the mouse pointer
to the function block you want
to connect the first function
block with.
When you release the mouse
button, LOGO!Soft Comfort V8
will connect both function
blocks.
6. Once both function blocks are
connected, LOGO!Soft
Comfort V8 will create a
function block pair and an
Ethernet connection and a
data transfer mechanism.
When the function blocks are
displayed in green,
configuration of the
communication between the
two LOGO! devices is
complete.
Note:
If one of the two function
blocks is displayed in red,
configuration of the
communication between the
two LOGO! devices is not yet
complete.
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
LOGO!Soft Comfort V8
13