Headlight Beam Adjustment
The headlight beam can be
adjusted both right and left or up
and down if necessary.
High Beam
Low Beam
To adjust the beam up and
down:
Turn the adjuster 1 clockwise or
counterclockwise.
To adjust the beam right and
left:
Turn the adjuster 2 clockwise or
counterclockwise.
NOTE: To adjust the headlight
beam, adjust the beam right and
left first, then adjust up and down.
Turn Signal Light
To replace the turn signal light
bulb, follow these directions.
1. Remove the screw and take off
the lens.
2. Push in on the bulb, twisting it
to the left, and pull it out.
NOTICE
Overtightening
when reinstalling the lens may
cause the lens to crack.
Tighten the screws only until
they are snug.
7-51
the
screws