Suzuki V-Strom DL650 2017 Manual page 122

 WARNING
Failure to adjust the drive chain
and failure to torque bolts and
nuts properly could lead to an
accident.
• After installing
wheel, adjust the drive chain
as described in the DRIVE
CHAIN ADJUSTMENT sec-
tion.
• Torque bolts and nuts to the
proper specifications. If you
are not sure of the proper
procedure, have your autho-
rized Suzuki dealer or a qual-
ified mechanic do this.
Rear axle nut tightening torque:
100 N·m (10.0 kgf-m, 72.5 lbf-ft)
the rear
7-47
WARNING
Failure to extend brake pads
after installing the wheel can
cause poor braking perfor-
mance and may result in an
accident.
Before riding, "pump" the
brake pedal repeatedly until
brake pads are pressed against
the brake disks and proper
pedal stroke and firm feel are
restored. Also check that the
wheel rotates freely.