Advertisement
2. Remove the adhesive protective liner.
Lift the SureCatch™ up in contact with the
underside of the drawer frame, lining it up to
your mark. Be careful not to let the adhesive
stick to the back of the frame.
3. Now slide the SureCatch™ towards you until
the adhesive sticks to the back of the frame.
Press on the adhesive firmly for at least 30
seconds for the adhesive to adhere properly.
4. Hold the Mounting Plate VERTICALLY with
the arrow pointing up and slide the Magnet
Lock into the top position by lifting the
Locking Tabs.
5. Insert the Perfect-Installation Tool into the
Magnet Lock with the wide end sliding into
the slot on top of the Magnet Lock.
6. Insert Perfect-Installation Tool in the RIGHT
slot of the SureCatch™.
2
3
4
5
6
9
Advertisement
