Advertisement
2A - Measurement of 0"-3/4"
1
1. With the Magnet Lock still in the middle
position of the Mounting Plate from STEP 1 and
with the Perfect-Installation Tool still attached,
insert the Perfect Installation Tool into the
LEFT (A) slot of the SureCatch™ until it grips.
This will hold the Mounting Plate in the desired
position.
2
2. Slowly push the drawer in to verify that the
Mounting Plate hits on the drawer box. Then
open the drawer again.
3
3. Remove the adhesive protective liner on the
Mounting Plate. Slowly push the drawer in until
the Mounting Plate sticks to the drawer box.
4
4. Now reach in with your fingers and press
firmly on the Mounting Plate against the drawer
box for at least 30 seconds. Open drawer.
Remove the Perfect-Installation Tool. You're
DONE!
2B - Measurement of 3/4"-2"
1
1. Remove the Magnet Lock from the Mounting
Plate and while holding Mounting Plate
VERTICALLY with the arrow pointing up,
re-insert the Magnet Lock into the Mounting
Plate from the top and with the Perfect-
Installation Tool still attached .
6
1
2
3
4
1
Advertisement
