Page 1
For Cabinet Doors please see instructions after Step 3. IMPORTANT: Qdos wants to keep your children safe and for that we need you to do your part by carefully reading and following the instructions below. Please read through the instructions before starting the installation.
Parts List: Magnet Key Perfect- 4 Magnet Locks Installation Storage Disc Tool Locking Training 4 Mounting Plates Stickers 4 Screws 4 SureCatches™ Drawers For installation in Drawers, please see page 3 Doors For installation on Doors, please see page 8...
Page 3
Know your cabinet type There are three basic types of kitchen cabinets and the following drawings will help you determine which type you have. Standard Framed Frameless “Euro” Flush Framed Cabinet Cabinet* Cabinet** Front Side Front Side Front Side The Standard Framed Cabinet is by far the most common type and if this is what you have, follow the 2-Step Installation below.
Page 4
1. While holding the Mounting Plate Horizontally slide the Magnet Lock into the center position. 2. Insert the Perfect- Installation Tool into the Magnet Lock with the wide end sliding into the slot on top of the Magnet Lock. 3. Insert the Perfect- Installation Tool into the opening above the LEFT left catch...
Page 5
While most other latches on the market create different opening gaps depending on the installation situation, which in many cases will allow a child to reach into the drawer, the Qdos SureCatch™ creates one safe gap by allowing for different installations depending on the design and measurements of your cabinet.
Page 6
2A - Measurement of 0”-3/4” 1. With the Magnet Lock still in the middle position of the Mounting Plate from STEP 1 and with the Perfect-Installation Tool still attached, insert the Perfect Installation Tool into the LEFT (A) slot of the SureCatch™ until it grips. This will hold the Mounting Plate in the desired position.
Page 7
2. Slide the Magnet Lock until it locks in place at the top of the Mounting Plate. 3. Insert the Perfect-Installation Tool into the LEFT (A) slot of the SureCatch™ until it grips. This will hold the Mounting Plate in the desired position.
Page 8
2C - Measurement of Over 2” 1. With the Magnet Lock still in the middle position of the Mounting Plate from STEP 1 and with the Perfect-Installation Tool still attached, insert the Perfect-Installation Tool into the RIGHT (B) slot of the SureCatch™ until it grips. This will hold the Mounting Plate in the desired position.
Page 9
2. Remove the adhesive protective liner. Lift the SureCatch™ up in contact with the underside of the drawer frame, lining it up to your mark. Be careful not to let the adhesive stick to the back of the frame. 3. Now slide the SureCatch™ towards you until the adhesive sticks to the back of the frame.
7. Remove the adhesive protective liner on the Mounting Plate. 8. Carefully close the door until Mounting Plate sticks to it. Open door and press Mounting Plate firmly against the door for 30 seconds. Do not use a screw as it may penetrate the front of the door.
Storing the Magnet Key It is very important to store the Magnet Key out of reach, and even better out of sight, for children. The included Magnetic Storage Disc with adhesive on the back allow you to store the Magnet Key in your chosen location. IMPORTANT: If at all possible, make it a habit of not allowing your children to see when you open up...