Advertisement
1. While holding
the Mounting Plate
Horizontally slide the
Magnet Lock into the
center position.
2. Insert the Perfect-
Installation Tool into the
Magnet Lock with the
wide end sliding into the
slot on top of the Magnet
Lock.
3. Insert the Perfect-
Installation Tool into the
opening above the LEFT
catch on the SureCatch™.
This will hold the
Mounting Plate in the
desired position.
4. Hold this assembly up to the front of the
cabinet frame.
Push the drawer in so you can judge to make
sure the mounting plate doesn't hit on a
screw head. Reposition, if needed.
5. Carefully mark the location for the
SureCatch™ on the frame with a pencil.
6. Remove the Perfect-Installation Tool from
the SureCatch™ and peel the protective liner
off so it can be glued onto the back of the
frame.
7. From behind the cabinet frame, lift the
SureCatch™ up until it makes contact with
the drawer frame, lining it up to your mark.
Be careful not to let the adhesive stick to the
back of the frame until the catch is lifted up in
contact with the bottom of the frame.
4
1
3
left catch
2
4
5
6
7
Advertisement
