Bose SoundLink AM319182 Owner's Manual page 6

TAB 8, 16 TAB 7, 15
S S
YSTEM ETUP
Activating the system
Initially, the battery is not fully charged and may be in a
protection or inactive mode.
To activate your new system and charge the battery:
1. Place the SoundLink™ speaker on a flat, stable
surface.
2. Attach the AC adapter for your region (more than one
may be included) to the power supply.
Your system includes one of these two
types of power supplies.
AC adapter
IMPORTANT IN CHINA AND KOREA ONLY:
An AC adapter for use in your country is labeled on the
outside of the small bag that contains it. Be sure to use
that adapter only.
2
TAB 6, 14 TAB 5, 13 TAB 4, 12 TAB 3, 11
3. Plug the DC power cord on the power supply into the
DC POWER connector on the SoundLink speaker.
DC
POWER
4. Plug the power supply into a live AC outlet.
CAUTION: Use this system only with the provided
power supply or a replacement power supply from
Bose Corporation.
Note:
To reach full charge, the battery requires charging for a
minimum of 10 hours. See "Charging the battery" on page 9.
TAB 2, 10 English
Power
supply
DC power cord