Symbology; Electrical Safety - Xerox Document Centre 240 DC User Manual

Symbology

This symbol on the machine indicates heated surface

Electrical Safety

CAUTION Ensure that the power connection for your machine
satisfies these requirements.
The Document Centre requires a 115V outlet. The 470/
460/265/255 DC or ST each require a dedicated 20A
circuit. The 240 DC or ST requires a dedicated 15A
circuit.
1. The power receptacle for the machine must meet the
2. The socket outlet shall be installed near the equipment and
3. Use the power cable that is supplied with your Document
4. Plug the power cable directly into a correctly grounded
5. Do not use an adapter to connect the Document Centre to
6. The power cord is the disconnect device for this machine.
7. Do not override or disable electrical or mechanical
8. Do not push objects into slots or openings on the machine.
9. Do not obstruct ventilation openings. These openings
Page 2
requirements stated on the data plate on the rear of the
machine.
shall be easily accessible.
Centre. Do not use an extension cord or remove or modify
the power cord plug.
electrical outlet. If you are not sure, consult an electrician.
an electrical outlet that lacks a ground connection terminal.
interlocks.
Electrical shock or fire may result.
prevent overheating of the Document Centre.
Xerox Document Centre User Guide