Table of Contents
Advertisement
CHAPTER 5: QUICKFLY RIGGING
UPQ-D SERIES RIGGING ACCESSORIES
To move beyond the basic eye bolt rigging, Meyer Sound offers UPQ-D Series rigging accessories that facilitate more
configurations (Table 4).
Table 4: ULTRA-X40/42 Rigging Options
Model
MYA-UPQ Mounting Yoke
(PN 40.185.052.01)
MPA-UPQ Array Adapter Plate
(PN 40.185.054.01)
Eye bolts
(PN 40.185.013.01)
POLE-MOUNTING THE UPQ-D SERIES
A single UPQ-D Series loudspeaker may be mounted on a
heavy-duty loudspeaker stand with a standard 38 mm (1.5 in)
pole using its integral pole mount receptacle. The load rating
for the stand must meet or exceed the weight of the
UPQ-D Series loudspeaker (95 lb or 43 kg) and the pole must
be installed according to the manufacturer's instructions.
Figure 15: UPQ-D Series Mounted on Pole
CAUTION:
Make sure the pole is designed to
!
support the total weight of the UPQ-D Series
loudspeaker and observe all safety precautions
specified by the pole manufacturer.
26
Features
The MYA-X40 Yoke suspends a single UPQ-D Series loudspeaker and supports a wide range of
horizontal and vertical adjustments. The bottom bar of the yoke attaches to the bottom of the loud-
speaker. The kit includes two M10 x 20mm knobs/washers and two M10 x 1.5 x 70 hex head
screws.
The MPA-UPQ Array Adapter Plate kit includes two plates to facilitate installation of UPQ-D Series
loudspeakers in both horizontal and vertical clusters at angles between 34° and 50°. The kit
includes eight M10 x 20 mm knobs and washers.
Replacement black-coated M10 1.5 x 17 mm eye bolts, quantity 2
THE MYA-UPQ MOUNTING YOKE
The MYA-UPQ (PN 40.185.052.01) mounting yoke suspends
a single UPQ-D Series loudspeaker and allows a wide range
of horizontal and vertical adjustment. The mounting yoke's
bottom bar attaches to the bottom plate of the loudspeaker
with two M10 mounting screws (included). A "C" or "G"
hanging clamp and steel safety cable (not included) are
required to suspend the MYA-UPQ mounting yoke.
Figure 16: MYA-UPQ Mounting Yoke
NOTE:
The top bar of MYA-UPQ mounting
yoke accommodates hanging clamps with
standard 1/2-inch or 12 mm bolts.
Hide quick links:
Advertisement
Table of Contents
