Related Manuals for Meyer Sound MILO 60
Summary of Contents for Meyer Sound MILO 60
- Page 1 M SERIES OPERATING INSTRUCTIONS ADDENDUM MILO 60 High-Power Narrow Coverage Curvilinear Array Loudspeaker Addendum to MILO Operating Instructions (PN 05.132.095.01 A) Keep these important operating instructions. Check www.meyersound.com for updates.
- Page 2 MILO, TruPower, RMS and REM are trademarks of Meyer Sound. Meyer Sound, Meyer Sound MAPP Online, SIM and QuickFly are registered trademarks of Meyer Sound Laboratories Inc. (Reg. U.S. Pat. & Tm. Off.). All third-party trademarks mentioned herein are the property of their respective trademark holders.
-
Page 3: Symbols Used
2. Keep these instructions. 12. Use only with the caster rails or rigging specified by 3. Heed all warnings. Meyer Sound, or sold with the loudspeaker. Handles 4. Follow all instructions. are for carrying only. 5. Do not use this loudspeaker near water. -
Page 4: Safety Summary
Vuelva a conectar la alimentacion without using weather protection par du personnel qualifié et agréé de voltaje una vez efectuadas equipment from Meyer Sound. par le constructeur. todas las interconexiones de Do not allow water or any señalizacion de audio. - Page 5 Operating Instructions Addendum: MILO 60 MILO™ 60 HIGH-POWER NARROW COVERAGE CURVILINEAR ARRAY INTRODUCING THE MILO 60 As with all MILO loudspeakers, the MILO 60 comes stan- dard with integrated amplification, RMS™ remote moni- A variation on the popular MILO high-power curvilinear...
- Page 6 MG-3D/M multipurpose grid for flying. This type of array is especially useful when narrow coverage Since the MILO 60 is identical in size to the MILO, all of the is required. standard MILO QuickFly hardware may be used. Each cabi- Typical applications would be as audience side-fill loud-...
- Page 7 Operating Instructions Addendum: MILO 60 Figure 3. Example configuration: combined MILO 60 (top three cabi- nets) and MILO array Figure 4. Example configuration: combined MILO 60 (top), MILO, and MILO 120 (bottom) array...
- Page 8 Operating Instructions Addendum: MILO 60 USING SUBWOOFERS WITH THE MILO 60 MILO 60 with the M3D-Sub A MILO 60 system (or combined MILO 60/MILO/MILO 120 The M3D-Sub directional subwoofer adds substantial low- system) will provide full bandwidth frequency response frequency headroom to MILO curvilinear arrays, extending down to 60 Hz.
- Page 9 Online can be found in the MILO Operating Instructions at systems consisting of the MILO 60 by itself or in combina- the end of the “Line Arrays and System Integration" section.
- Page 10 Operating Instructions Addendum: MILO 60...
-
Page 11: Appendix A: Milo 60 Specifications
Operating Instructions Addendum: MILO 60 APPENDIX A: MILO 60 SPECIFICATIONS ACOUSTICAL Note: The low-frequency power response of the system will increase according to the length of the array. Operating frequency range 60 Hz - 18 kHz Note: Recommended maximum operating frequency range. Response depends upon loading conditions and room acoustics. - Page 12 Operating Instructions Addendum: MILO 60 AUDIO INPUT Type Differential, electronically balanced Max. common mode range ±15 V DC, clamped to earth for voltage transient protection Connectors Female XLR input with male XLR loop output or VEAM Input impedance 10 kΩ differential between pins 2 and 3 Wiring Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual...
- Page 13 Operating Instructions Addendum: MILO 60 PHYSICAL: MILO 120 Loudspeaker Enclosure Multi-ply hardwood Finish Black textured Protective grille Powder-coated hex stamped steel Rigging QuickFly MRF-MILO rigging frame, custom AlignaLink connectors and quick release pins Dimensions 54.00" w x 14.47" h x 22.00" d (1372 mm x 368 mm x 559 mm) Weight 235 lbs (106.60 kg)
- Page 14 Operating Instructions Addendum: MILO 60...
- Page 16 Meyer Sound Laboratories Inc. 2832 San Pablo Avenue Berkeley, CA 94702 www.meyersound.com © 2005 T: +1 510 486.1166 Meyer Sound Laboratories Inc. F: +1 510 486.8356 05.132.095.02 A...