LG CU920 Manual page 47

Hide thumbs Also See for CU920:
Table of Contents

Advertisement

3.7.3 HSDPA features
The MSM6281 device supports the HSDPA release 5 standard:
■ Supports HS-DSCH (HS-SCCH, HS-PDSCH and HS-DPCCH) in addition to the R99 transport
channels as defined in 3GPP specifications.
■ Supports a maximum of four simultaneous HS-SCCH channels as defined in 3GPP specifications.
■ Supports a maximum of 10 HS-PDSCH channels and supports both QPSK and 16 QAM modulation.
It supports UE category 6 in SW release 2.0 and category 8 in SW release 4.0.
■ Supports CQI, and ACK/NACK on HS-DPCCH channel as defined in 3GPP specifications.
■ Supports all incremental redundancy versions for HARQ, as defined in 3GPP specifications.
■ Can switch between HS-PDSCH and DPCH channel resources, as directed by the network.
■ Can be configured to support any of the two power classes 3 or 4 as defined in 3GPP R5
specifications (25.101).
■ Supports network activation of compressed mode by SF/2 or HLS on the DPCH for conducting inter-
frequency or inter-RAT measurements when the HS-DSCH is active.
■ Supports STTD on both associated DPCH and HS-DSCH simultaneously.
■ Supports CLTD mode 1 on the DPCH when the HS-PDSCH is active.
■ Supports STTD on HS-SCCH when either STTD or CLTD Mode 1 are configured on the associated
DPCH.
■ Supports TFC selection limitation on the UL factoring in the transmissions on the HS-DPCCH as
required in TS 25.133.
3.7.4 GSM features
The following GSM modes and data rates are supported by the MSM6281 device hardware. Support
modes conform to release '99 specifications of the sub-feature.
■ Voice features
❏ FR
❏ EFR
❏ AMR
❏ HR
❏ A5/1, A5/2, and A5/3 ciphering
■ Circuit-switched data features
❏ 9.6k
❏ 14.4k
❏ Fax
❏ Transparent and non-transparent modes for CS data and fax
❏ No sub-rates are supported.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. TECHNICAL BRIEF
- 49 -
LGE Internal Use Only

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cu915

Table of Contents