Connecting The Cables - HP EliteDisplay E24d G4 User Manual

Connecting the cables

NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Connect a video cable.
NOTE:
by pressing the
Connect one end of a USB Type-C cable to the USB Type-C port on the rear of the monitor and the
●
other end to the USB Type-C port on the source device. (Use only the HP-approved USB Type-C
cable provided with the monitor.)
The monitor automatically determines which inputs have valid video signals. Select the inputs
Menu button to access the on-screen display (OSD) menu and then selecting Input.
Setting up the monitor 9