Windsor Saber Glide 10052530 Operating Instructions Manual page 13

1. Key switch
2. Emergency stop button
3. One touch switch
4. Brush pressure switch
5. Solution control switch
6. Vacuum/squeegee switch
7. Display toggle switch
• Information Screen 1
• Information Screen 2
• Hour meter
• Fault codes and special icons
• Battery meter
1. KEY SWITCH
Controls the power for the machine functions. To turn the machine power on, rotate key clockwise. When the
key is turned on the battery symbol will flash for 12 seconds while the system runs self-diagnostics and
returns scrub deck and squeegee to raised position, if necessary. The controller will not respond to other
commands until this routine is complete. To turn the machine power off, rotate key counterclockwise.
INFORMATION DISPLAY
2. EMERGENCY STOP BUTTON
This safety feature is designed to cut all power to the machine at any time. To shut the machine power off,
push the Emergency Stop switch. To reset the machine, rotate the switch clockwise.
INFORMATION DISPLAY
8. Recycle switch (optional)
9. Recycle indicator light (optional)
10. Headlight switch (optional)
11. Brake pedal
12. Parking brake lever
13. Directional control pedal and speed
reduction feature.
14. Steering wheel
15. Steering tilt lever
16. Horn button
17. Seat adjustment grab bar
18. Squeegee camber adjustment knob
19. Squeegee deflection adjustment knob
20. Side squeegee deflection adjustment knob
SGJ32 86037680 01/03/07
CONTROLS
3-6