Bosch 4310 Operating/Safety Instructions Manual page 9

BM 2610012089 03-10 E:BM 2610012089 03-10 E 3/30/10 7:40 AM Page 9
36
42
39
6
30
29
22
31. Bevel Detent pin (Crown Molding Setting) –
Allows you to easily lock the head assembly to
the bevel angle of 33.9° to the left or right.
32. Bevel Scale – This scale is large and angled to
allow you to easily read bevel angles.
33. Head Assembly lock pin – The saw is
equipped with a lock pin used to lock the head
assembly in the lower position for transporting.
34. Quick Release Depth Stop Button – Allows
you to quickly release the depth stop.
35. Depth Stop fine Adjustment Knob–Allows
you to adjust the depth of the blade for cutting
grooves in the workpiece (Figure 13, page 17).
36. Handle Rotation Release lever (Model 4410
only) – Pulling this lever allows the handle to be
rotated. Release the lever into one of four oper-
ating positions.
37. Rear Carrying Handle – Used for lifting of the
tool.
38. Handle Clamp (Model 4410 only) – Locks han-
dle in the selected position.
38
33
46
40
35
37
34
24
31
44
19
39. Arbor lock—Allows the user to keep the blade
from rotating while tightening or loosening arbor
screw during blade replacement or removal.
40. front Carrying Handle – Used for lifting the
tool.
41. lower Guard Actuation link – Allows for
smooth movement of the lower guard.
42. Upper Blade Guard – Covers upper portion of
the blade.
43. Dust Bag and Dust Elbow – Used to collect
saw dust.
44. Sliding fence lock Knob – Used to hold fence
position after slide adjustment.
45. Rear Cover Tool Storage – Storage for
10mm/17mm Combination Open End Wrench
and 1.5mm & 3mm Hex "L" Wrenches.
46. Microfine Miter Adjustment System – Allows
for fine adjustment (up to 2 degrees to the left or
right) of the detent angles.
43
27
23
45
32
31