BM 2610012089 03-10 F:BM 2610012089 03-10 F 3/30/10 8:48 AM Page 88
Combination Square
Draw Light
Line on Board
Along this Edge
Should be no Gap or Overlap
when Square is Flipped Over
in Dotted Position
Hex "L" Wrench
(supplied) 1.5mm
Combination Square Must be True
Straight Edge of Board 3/4"
Thick This Edge Must be
Perfectly Straight
Multi Purpose "L" Wrench 6.5mm
(supplied with model 5312 only)
Multi Purpose Tool (supplied
with model 5412 only)
10mm/17mm Combination
Open End Wrench