Jig Saw Blades - Bosch 4100DG-09 Product Manual

Jig Saw Blades

As the world's largest jig saw tool and blade manufacturer, Bosch understands the demands of cutting materials
quickly, smoothly and precisely. Bosch's optimized jig saw blade configurations cut precisely and easily in
conventional and specialized materials.
Blade configurations include Progressor® tooth design for superior performance in speed and cleanliness of cut,
plunge blade tip shapes for easy plunge cutting in wood, longer blades for deep sandwich material cuts and
flexible blades that provide strength in curve and angle cutting.
Bosch makes it easy for you to quickly find the blade that best fits the job with simple color coding and blade
applications that are identified on each blade. For the professional that requires technical detail, key blade
specifications are provided such as overall length and working length, blade materials, tooth design, angles and
pitch (teeth per inch (TPI)).
Teeth (TPI)
Every material has a different thickness. To achieve
the best possible cutting quality and the fastest
cutting time, it is important to match material
thickness with the proper blade geometry.
Always keep 2-3 teeth in material while cutting.
Progressor® Patented Tooth Design
The Progressor® name comes from the progressive tooth pattern that graduates from high to low teeth per inch over the length of the blade.
The progressive tooth pattern is engineered so the blade can cut both thick and thin material cleanly and smoothly. The Progressor® line of
blades are the ideal blades when switching from one material thickness to another, eliminating the need for blade changes and saving time
on the job. Available for wood, metal or all purpose applications.
Thin Material
Small Teeth
Match the Blade to the Job
High Carbon Steel (HCS)
Excellent blades for softer materials such as wood, laminated
particleboard and plastics.
Bi-Metal (BiM)
This highly flexible, tough combination of HSS
and HCS results in a blade suitable for the most
demanding applications when there is a risk of
breakage or when extreme flexibility and versa-
tility are required.
Tooth Design
Side Set & Milled
For fast, rough cuts in wood
and plastics.
70
Boschtools.com
Blade s
J i g Saw
6 TPI
HCS
For flexibility.
Ground Teeth
For superior speed and cleanliness.
LASTS
LASTS
10X
2X
LONGER
LONGER
THAN HIGH
THAN HIGH
CARBON SPEED
STEEL STEEL
™ ™
Bosch blades are designed with optimal tooth spacing, tooth shape and cutting angle to give you
the best possible speed, cleanliness of cut and optimal performance.
Side Set & Ground
For clean, fast cuts in wood
and plastics.
Toll Free: 877-BOSCH-99
14 TPI
Taper Ground
For speed and increased blade life.
Thick Material
Large Teeth
High Speed Steel (HSS)
Fully hardened high speed steel blades are ideal for cutting
metal, aluminum and non-ferrous metal.
Tungsten Carbide (TC)
LASTS
10X
Use blades with tungsten carbide teeth to cut abra-
LONGER
THAN sive materials such as reinforced plastics, fiberglass,
BI-METAL
cement board and stainless steel. Use blades coated
™
with tungsten carbide grit to cut abrasive materials
such as tile, glass, cast iron and brick.
Wavy Set & Milled
For cuts in metal, non-ferrous
metal, aluminum and plastics.
36 TPI
Tip Engineered
For easy plunge cuts.
LASTS
LASTS LASTS
10X
2X 10X
LONGER
LONGER LONGER
THAN HIGH THAN HIGH
THAN
CARBON
SPEED BI-METAL
STEEL STEEL
™
™ ™
Ground & Taper Ground
For precise, fine, clean cuts
in wood.