Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Supermicro AOC-ATG-i2T
Summary of Contents for Supermicro AOC-ATG-i2T
- Page 1 AOC-ATG-i2T AOC-ATG-i2TM User's Guide Revision 1.0...
- Page 2 CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”. The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
- Page 3 AOC-ATG-i2T(M) add-on card. About this Add-on Card The Supermicro® Advanced I/O Module (AIOM) is the latest form factor designed to provide a wide range of networking options as well as other I/O technologies. The AOC-ATG-i2T(M) is one of the most feature-rich lower power 10GBase-T controllers in the market today.
- Page 4 Super AOC-ATG-i2T(M) Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and for safety instructions to prevent damage to the system or injury to yourself: Note: Additional information given for proper system setup.
- Page 5 Preface...
- Page 6 Super AOC-ATG-i2T(M) Add-on Card User's Guide Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V.
-
Page 7: Table Of Contents
Chapter 3 Installation Static-Sensitive Devices .................. 3-1 Before Installation ................... 3-2 Installing the Add-on Card AOC-ATG-i2T (with 1U bracket) ......3-3 Installing the Add-on Card AOC-ATG-i2TM (with 0.5U bracket) ..... 3-6 Installing Drivers on Windows (for Intel® X550-AT2) ........3-9 Installing Drivers on Linux (for Intel®... -
Page 8: Chapter 1 Overview
Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website at http://www.supermicro.com/ products/nfo/networking.cfm#adapter. -
Page 9: Technical Specifications
Super AOC-ATG-i2T(M) Add-on Card User's Guide Technical Specifications General • Advanced I/O Module (AIOM) form factor • Intel® X550 dual-port 10GbE controller with integrated MAC and PHY • Dual RJ45 ports I/O Features • Intel Flow Director • MSI/MSI-X support •... -
Page 10: Available Skus
Chapter 1: Overview • EEEE 1588 • Asset Management support on Supermicro® platforms • NC-SI for Remote Management on Supermicro® platforms Cable Support • RJ-45 Category-6 up to 55m; Category-6A up to 100m Power Consumption • Maximum power consumption 13W Operating Conditions •... -
Page 11: Chapter 2 Hardware Components
Chapter 2: Hardware Components Chapter 2 Hardware Components Add-On Card Image and Layout Side view of the AOC-ATG-i2T Front view of the AOC-ATG-i2T... - Page 12 Super AOC-ATG-i2T(M) Add-on Card User's Guide Side view of the AOC-ATG-i2TM Front view of the AOC-ATG-i2TM...
-
Page 13: Major Components
Chapter 2: Hardware Components LED5 JLAN2 JLAN1 JSDP2 JSDP1 AOC-ATG-i2T DESIGNED IN USA REV:1.00 Major Components The following components are on the AOC-ATG-i2T(M): 1. One Intel® X550 10GbE controller 2. Dual RJ45 ports 3. JSDP1 4. JSDP2 5. PCI-E 3.0 x4 interface... -
Page 14: Led Indicators And Connectors
Super AOC-ATG-i2T(M) Add-on Card User's Guide LED Indicators and Connectors LAN Ports The AOC-ATG-i2T(M) has two network LAN (SFP+) ports. These LAN ports support connection speeds up to 1Gbps. Plug the Direct Attached Copper (DAC) cable into the SFP+ port for network connections. -
Page 15: Lan Led
Chapter 2: Hardware Components Color Definition Link Amber 1G Link Speed (Left) Green 10G Link Speed Activity Green Flashing Activity (Right) LAN LED Each SFP+ connector has two LEDs. The LED on the top indicates link speeds, and the LED on the bottom indicates the status of activity of the connector. See the table above for more information. -
Page 16: Jsdp1 And Jsdp2
Use Header JSDP1 and JSDP2 to connect to a cable to communicate with the SDP of the LAN chips on the AOC-ATG-i2T(M). JSDP1 is for the first LAN port and JSDP2 is for the second port. See the table below for header settings. -
Page 17: Major Components Of Aiom Module
Chapter 2: Hardware Components Major Components of AIOM Module The major components of the Supermicro® Advanced I/O Modules (AIOM) are the card and bracket. Before a computer system can operate, all slots are required to be populated. If an AIOM module is used, be sure that the bracket is firmly installed into the chassis. -
Page 18: Chapter 3 Installation
Chapter 3: Installation Chapter 3 Installation Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam- aging your add-on card, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. Precautions •... -
Page 19: Before Installation
Super AOC-ATG-i2T(M) Add-on Card User's Guide Before Installation Before you install the add-on card, follow the instructions below. 1. Power down the system. 2. Unplug the power cord. 3. Use industry-standard anti-static equipment such as gloves or a wrist strap and follow the precautions on page 3-1 to avoid damage caused by ESD. -
Page 20: Installing The Add-On Card Aoc-Atg-I2T (With 1U Bracket)
Chapter 3: Installation Installing the Add-on Card AOC-ATG-i2T (with 1U bracket) Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system top cover for ease of installation.) - Page 21 Super AOC-ATG-i2T(M) Add-on Card User's Guide B. Installing an AIOM module (Reinstalling an AIOM module into an empty slot) 1. Position the AIOM module in front of the empty slot and gently push onto the metal bracket (do not use the blue latch). The AIOM module should slide into the chassis until the card securely seated in the connector.
- Page 22 Chapter 3: Installation C. Installing an AIOM module (An AIOM slot with an AIOM slot cover) 1. Remove the AIOM slot cover by pulling it with two handles. 2. Position the AIOM module in front of the empty slot and gently push onto the metal bracket (do not use the blue latch).
-
Page 23: Installing The Add-On Card Aoc-Atg-I2Tm (With 0.5U Bracket)
Super AOC-ATG-i2T(M) Add-on Card User's Guide Installing the Add-on Card AOC-ATG-i2TM (with 0.5U bracket) Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of server top cover is not required. If the system... - Page 24 Chapter 3: Installation B. Installing an AIOM module 1. Position the AIOM module in front of the empty slot and gently push onto the metal bracket. The AIOM module should slide into the chassis until the card is securely seated in the connector. 2.
- Page 25 Super AOC-ATG-i2T(M) Add-on Card User's Guide C. Installing an AIOM module (An AIOM slot with an AIOM slot cover) 1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches the bracket to the chassis. Pull the bracket away and set it aside.
-
Page 26: Installing Drivers On Windows (For Intel® X550-At2)
Chapter 3: Installation Installing Drivers on Windows (for Intel® X550-AT2) Follow the steps below to install the drivers for the Windows operating systems. Download the drivers from Intel Download Center or the Supermicro site at https:// www.supermicro.com/wftp/Networking_Drivers. 1. Run CDR-NIC. -
Page 27: Installing Drivers On Linux (For Intel® X550-At2)
Super AOC-ATG-i2T(M) Add-on Card User's Guide Installing Drivers on Linux (for Intel® X550-AT2) Download the drivers from Intel Download Center or the Supermicro site at https:// www.supermicro.com/wftp/Networking_Drivers. Build a Binary RPM Package 1. Run ‘rpmbuild -tb <filename.tar.gz>’ 2. Replace <filename.tar.gz> with the specific filename of the driver. -
Page 28: Installing Drivers On Freebsd (For Intel® X550-At2)
Chapter 3: Installation Note: IXGBE_NO_LRO is a compile time flag. The user can enable it at compile time to remove support for LRO from the driver. The flag is used by adding CFLAGS_EXTRA=-”DIGB_NO_LRO” to the make file when it’s being compiled. make CFLAGS_EXTRA=”-DIGB_NO_LRO”... - Page 29 Super AOC-ATG-i2T(M) Add-on Card User's Guide 2. Untar/unzip the archive: tar xfz ixgbe-x.x.x directory 3. To install man page: cd ixgbe-x.x.x gzip -c ixgbe.4 > /usr/share/man/man4/ixgbe.4.gz 4. To load the driver onto a running system, perform the following steps: cd ixgbe-x.x.x make cd ixgbe-x.x.x/src...
- Page 30 Chapter 3: Installation Example usage: ifconfig_ixgbe0="inet 192.168.10.1 netmask 255.255.255.0" 8. If you want to compile the driver into the kernel, enter: cd ixgbe-x.x.x/src mkdir /usr/src/sys/dev/ixgbe cp if_ixgbe* /usr/src/sys/dev/ixgbe cp ixgbe* /usr/src/sys/dev/ixgbe cp Makefile.kernel /usr/src/sys/modules/ixgbe/Makefile Edit the /usr/src/sys/conf/files.i386 file, and add the following line: dev/ixgbe/ixgbe_hw.c optional ixgbe dev/ixgbe/ixgbe_ee.c optional ixgbe dev/ixgbe/if_ixgbe.c optional ixgbe...