GMC Yukon 2021 Owner's Manual page 44

Save preferred memory feature positions to
both 1 and 2 if you are the only driver.
Manually Recalling Memory Positions
Press and hold 1, 2, or to recall the
previously saved memory positions if you
are driver 1 or 2 identified in the DIC
welcome message.
To stop Manual Memory recall movement,
release 1, 2, or or press any of the
following controls:
Power seat
Memory SET
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
Manual Memory recall movement for 1, 2,
or buttons may be initiated and may
complete to the saved memory position if
the vehicle is in or out of P (Park).
Seat Entry Memory
The vehicle identifies the number of the
current driver s remote key (1 8). See
Remote Keyless Entry (RKE) System
Operation 0 8. If the remote key is 1 or 2,
and Seat Entry Memory is enabled in vehicle
personalization, the positions saved to the
same memory button number 1 or 2 are
automatically recalled when the vehicle is
turned on, or turned from off to ACC/
ACCESSORY. Remote keys 3 8 will not
provide automatic memory recalls.
To turn Seat Entry Memory on or off, see
Vehicle Personalization Settings previously
in this section and Vehicle Personalization
0 125.
The vehicle must be in P (Park) to start Seat
Entry Memory. Seat Entry Memory recall
will complete if the vehicle is shifted out of
P (Park) prior to reaching the saved memory
position.
To stop Seat Entry Memory recall
movement, turn the vehicle off or press any
of the following controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
If the saved memory seat position does not
automatically recall or recalls to the wrong
positions, the driver s remote key number (1
or 2) may not match the memory button
Seats and Restraints
number that positions were saved to. Try
storing the position to the other memory
button or try the other remote key.
Seat Exit Memory
Seat Exit Memory is not linked to an remote
key. The position saved to
drivers. To turn Seat Exit Memory on or off,
see "Vehicle Personalization Settings"
previously in this section and Vehicle
Personalization 0 125.
If turned on, the position saved to
automatically recalled when one of the
following occurs:
The vehicle is turned off and the driver
door is opened within a short time.
The vehicle is turned off with the driver
door open.
To stop Seat Exit Memory movement, press
any of the following memory controls:
Power seat
Memory SET, 1, 2, or
Power mirror, with the driver or
passenger side mirror selected
Power steering wheel, if equipped
43
is used for all
is