GMC Yukon 2021 Owner's Manual page 159

158 Infotainment System
The audio content information such as
title, artist, and album.
The tracks album art.
The current position and total playing
time. Drag the progress point to move to
the position wanted.
The playback controls.
Playback controls are always displayed.
Playback controls include:
{ {
(Home): Touch to return to the RSI
Home selection screen.
(Headphones): Touch
Bluetooth Headphone Setup menu. See
Settings later in this section.
Browse: Touch Browse to display the
audio browser menu. See Audio Browser
later in this section.
Previous/Next: Touch or
the previous or next audio content.
or (Play or Pause): Touch
or touch to pause the audio content.
Shuffle: Touch to play the playlist
randomly.
Share: Touch to share the audio playback
with the other screen. Swiping the screen
to left or right also shares the screen.
Audio Browser
Touch Browse to go to the audio browser
screen.
to access the The following will display:
Content in the connected media source
can be sorted by Playlists, Artists, Albums,
Songs, Genres, Podcasts, and Audiobooks.
Touch
The audio content currently being played.
to select
Touch this section and it moves to the
audio playback screen.
The content sorted by the standard you
to play
choose. Touch the content wanted.
Miracast / HDMI
Miracast Connection
Connect Miracast compatible devices to
either the RSI screen by mirroring the
display of the mobile device through
to move to the next page.
WiFi-Direct. The system supports two
Miracast device connections at a time (one
for each screen) and allows both screens to
view that single connection simultaneously
through screen sharing.
Apple does not support the Miracast
standard.
To connect initially:
1. Touch Miracast in Watch section of the
home screen. The RSI system starts to
initialize the Miracast connection.
2. Select %Rear Seat% from your mobile
device's the Wi-Fi list. The device
connection pop-up message is displayed.
Touch OK. Touching Decline goes back to
the home screen.
3. Some Miracast enabled devices require to
enter a PIN number, supplied by the
device, into the RSI system or on the
device in order to complete the
connection process.
4. When the full connection is complete,
the RSI screen displays a mirror image of
the mobile devices display onto the
associated RSI screen.