Buderus Logano GE515 Operating Instructions Manual page 2

Preamble
This device meets all basic requirements of
relevant standards and guidelines.
Its conformity has been verified. All
associated documents and the original
Declaration of Conformity are available
from the manufacturer.
A copy of the Declaration of Conformity is
included in the installation and
maintenance instructions.
This product is a boiler block with a casing
pursuant to the Official Journal of the
European Union, L 239, Commission
Regulation (EU) No. 813/2013
implementing guideline 2009/125/EC Art. 2,
§6.
According to the aforementioned Official
Journal, Art. 1 § 2 (g), this product is
recognized as a replacement product which
replaces an identical boiler block already on
the market. Compliance with the intended
use of the boiler and its components must
be ensured and documented.
Anyone offering this product to consumers
shall be responsible for its correct use.
Regarding these instructions
These operating instructions contain important
information for the safe and appropriate operation and
maintenance of the oil- and gas-fired boiler Logano
GE515.
Subject to technical modifications.
Constant development may lead to minor deviations of
illustrations, functional steps and specifications from
those described/shown.
Updating your documentation
Please let us know if you would like to make suggestions
to improve our documentation or if you have noticed any
errors.
2 Operating instructions Oil- and gas-fired special boilers Logano GE515 • Issue 2018/01
Correct fuel
This system requires the correct fuel to ensure a proper
operation. During commissioning, your system installer
will enter the correct type of fuel, which your system
requires, into the table below.
SYSTEM DAMAGE
through incorrect fuel.
CAUTION!
 Only use the correct fuel identified for
your system.
USER NOTE
We recommend you seek the advice of
your system installer if you intend
changing the fuel for your system.
Use the following fuel:
company stamp/signature/date
We reserve the right to make any changes due to technical modifications.