Specifications - Zoom G11 Quick Manual

Specifications

Maximum number of
simultaneous effects
User patches
Sampling frequency
A/D conversion
D/A conversion
Signal processing
Frequency characteristics
Displays
Inputs INPUT
RETURN
AUX IN
Outputs Left/Right
PHONES
SEND
Input S/N
Noise floor Left/Right
(residual noise)
SEND
MIDI IN/OUT
Control input
Power
USB DEVICE
USB HOST
REMOTE
External dimensions
Weight
• 0 dBu = 0.775 V
Amplifier + 9 effects
240
44.1 kHz
24-bit 128× oversampling
24-bit 128× oversampling
32-bit
20 Hz – 20 kHz (+1 dB/−2 dB) (10kΩ load)
5" TFT color LCD (800×480)
Dot-matrix LCDs (128×32) (6)
Standard mono phone jack
Rated input level: -20 dBu
Input impedance (line): 500 kΩ
Standard mono phone jacks (2)
Rated input level: -20 dBu
Input impedance (line): 1 MΩ
Stereo mini jack
Rated input level: -10 dBu
Input impedance (line): 10 kΩ
Standard mono phone jack
Maximum output level:
INST/LINE +11.4 dBu/+19 dBu (when output impedance 10 kΩ or higher)
Standard stereo phone jack
Maximum output level:
Line +11.4 dBu (when output impedance 10 kΩ or higher)
Headphones 24 mW + 24 mW (at 32Ω load)
Standard mono phone jacks (2)
Maximum output level:
Line +11.4 dBu (when output impedance 10 kΩ or higher)
123 dB
INST/LINE −99.5 dBu/−92.5 dBu
-99.0 dBu
5-pin DIN jacks
FP02M input
AC adapter: 12V DC, center plus, 2000 mA (ZOOM AD-19)
Connector: USB2.0 Type-C / Supported cable: Type-C cable
GuitarLab: USB1.1 Full Speed
Audio Interface: USB2.0 High Speed, 44.1 kHz/32-bit 4in 4out
• Use cables for data transfer. USB bus power not supported.
Connector: USB2.0 Type-A / Standard: USB 2.0 High Speed
• Use a USB thumb drive.
ZOOM BTA-1 or other dedicated wireless adapter
253 mm (D) × 495 mm (W) × 64 mm (H)
2.8 kg
15