Error Code List - Fostex PD-6 Service Manual

PD-6 Service Manual
4-9. BATT volt (Battery Voltage)
This menu monitors either the AC adapter DC voltage (POWER
SEL SW setting: EXT, EXT_PWR_DETECT fed to pin-238 (AN6/
PTL6/DA1) of CPU U6 (SH7727)) or the NP-1 type battery DC
voltage (POWER SEL SW setting: INT, INT_BATT_DETECT fed
to pin-239 (AN7/PTL7/DA0) of CPU U6). If the DC voltage is
around 15V, the 4-digit hexadecimal value will be around 0240.
4-10. MemoryDump
This menu is only utilized at our manufacturer and has nothing to
do with servicing PD-6.
5. ERROR CODE / ALERT LIST
The Table below indicates the error code number and corresponding description. Since the error code list is basically
designed for our engineers to improve the software, the description is quite technical. If you find PD-6 displaying the
error codes, we encourage you to update the software to the latest one first. In case updating the software does not solve
the problem, we would like you to contact us.
Error / Alert
ERROR=0
ERROR=1
ERROR=20
ERROR=21
ERROR=83
TimeOut Read!
Read Error!
Disc Error! Write
Write Error
Event Over!
Diagnoses write!
Rec Timeout Err!
Rec Caution!
File Size Over!
Write Error!
20
Not defined.
Trying to access the sector address other than the accessible region on disc.
The file size exceeded the specified capacity (2GB or 4GB) while in REC mode. This error code will be
deleted on V1.03 software onwards.
Shortage of capacity while in REC mode occurred. This error code will be deleted on V1.03 software on-
wards.
Failed to Block-Erase while in the Flash ROM SAVE (writing) mode.
Time-out occurred when reading out data. Drive malfunction, disc failure, dust & dirt on the DVD-RAM
disc.
An error occurred when reading out data. Disc failure, dust & dirt on the DVD-RAM disc.
Time-out occurred when writing in data. After this error message appears, PD-6 initializes the DVD-RAM
drive. Disc failure, dust & dirt on the disc. Changing to a new disc or physical-format a disc is highly
recommended.
An error occurred when writing in data. Disc failure, dust & dirt on the DVD-RAM disc. Changing to a new
disc or physical-format a disc is highly recommended.
Too much disc fragmentation (discontinuous sector region) exceeding the UDF management while record-
ing an audio files. The disc on which editings were executed on PC were used on PD-6. This error rarely
occurs. The cause could be other than PD-6.
An error list information "file name.dia" was created because an error occurred when writing in audio data
on the disc.
A cache buffer overflowed and audio files could not be completed recorded on the disc. Dust & dirt on the
disc, failure sectors forcing the frequent retry of writing in data and / or many alternative sectors are used.
There is a possibility that a cache buffer overflowed and audio files could not be completed recorded on the
disc. Dust & dirt on the disc, failure sectors forcing the frequent retry of writing in data and / or many
alternative sectors are used.
The file size exceeded the specified capacity (2GB or 4GB) while in REC mode. Rarely occurs. It is consid-
ered that some sort of system error occurred.
A Verify Error occurred when recording audio files. Dust & dirt of disk, failure sectors. Since alternative
sectors are used, this error rarely occurs.
Description, cause and treatment