Setting Permanent Holds - White Rodgers SuperStat Pro SuperStat Pro Programmable Thermostat User Manual

Setting Permanent Holds

Quick Guide
Press to change
the setpoint to the
desired
temperature.
Press once.
24
Step Description
Be sure your screen shows the normal display. Press the
arrow buttons to change the temperature setpoint higher or
1
lower.
The HOLD icon below the Day of the Week bar will begin to
flash.
Press the HOLD button. The HOLD icon stops flashing,
2 indicating that you have placed the system on permanent
hold.
To clear the hold, press the RUN button.
Thermostat Display
HOLD will flash:
HOLD will stop
flashing:
SuperStat Pro User Guide