Sound Pro Drivers Installation And Application - Intel 440BX Manual

24

Sound Pro Drivers Installation and Application

This section describes the procedures and proper
applications which are recommended for this mainboard.
1. Before installing the Sound Pro drivers, make sure
that the operating system has been installed,
otherwise the Sound Pro may be detected as "Other
Device" by the device manager of the OS.
2. After finishing the driver installation, select the
MULTIMEDIA icon in the CONTROL PANEL.
Select WSS (Windows Sound System) as the
equipment option when playback, and select the
SB16 (Sound Blaster 16) as the equipment option
while recording, then click "OK" to confirm, to
ensure that the chip works with full duplex
applications.
3. Select MULTIMEDIA icon in the Control Panel to use
Software Wave-Table drivers as MIDI output device.
Select MIDI page, click on "SoftMIDI Driver", and
click "OK" to confirm it.
4. A Windows application named is provided within
Sound Pro drivers, which gives you the control over
all audio functions through a user interface which is
as simple as using a home stereo system. It is
recommended that user uses the System Mixer in the
Audio Rack to control the volume, select recording
device, and be able to record again.
5. If the MIDI port is used as a control interface, the
"MPU-401 MIDI" needs to be enabled through the
MIDI device setting of Sound Pro Audio Rack.
6. Refer to the attached CD for more information on
Sound Pro.
Chapter 2