Intel D101GGC Product Manual
  1. Manuals
  2. Brands
  3. Intel Manuals
  4. Motherboard
  5. D101GGC
  6. Product manual

Intel D101GGC Product Manual

Desktop board
Hide thumbs Also See for D101GGC:
Table of Contents

Advertisement

Quick Links

Intel® Desktop Board D101GGC
Product Guide
Order Number: D34588-004

Advertisement

Table of Contents
loading

Related Manuals for Intel D101GGC

Summary of Contents for Intel D101GGC

  • Page 1 Intel® Desktop Board D101GGC Product Guide Order Number: D34588-004...

  • Page 2: Revision History

    Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

  • Page 3: Intended Audience

    Intended Uses All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc.

  • Page 4: Box Contents

    Intel Desktop Board D101GGC Product Guide Terminology The table below gives descriptions to some common terms used in the product guide. Term Description Gigabyte (1,073,741,824 bytes) Gigahertz (one billion hertz) Kilobyte (1024 bytes) Megabyte (1,048,576 bytes) Mbit Megabit (1,048,576 bits)

  • Page 5: Table Of Contents

    Contents 1 Desktop Board Features Supported Operating Systems ....................10 Desktop Board Components ....................11 Processor..........................13 Main Memory ........................13 ATI RADEON* XPRESS 200 Chipset..................14 Graphics Subsystem ......................14 Audio Subsystem ........................14 Input/Output (I/O) Controller ....................15 LAN Subsystem ........................15 LAN Subsystem Software...................15 RJ-45 LAN Connector LEDs..................15 Hi-Speed USB 2.0 Support....................16 Enhanced IDE Interface ......................17 Serial ATA...........................17...
  • Page 6 2. LAN Connector LEDs....................16 3. Location of the Standby Power Indicator...............20 4. Installing the I/O Shield ....................25 5. Desktop Board D101GGC Mounting Screw Hole Locations..........26 6. Lift Socket Lever ......................27 7. Lift the Load Plate and Don’t Touch the Socket Contacts ..........27 8.
  • Page 7 19. Back Panel Audio Connectors for Flexible 6-Channel Audio System ......40 20. Location of Fan Headers....................41 21. Connecting 2x12 Power Supply Cables ................42 22. Location of Other Connectors on Desktop Board D101GGC.........43 23. Location of the BIOS Configuration Jumper Block ............44 24. Removing the Battery ....................50 Tables 1.
  • Page 8 Intel Desktop Board D101GGC Product Guide viii...

  • Page 9: Desktop Board Features

    • Suspend to RAM (STR) • Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel Related Links: For more information about desktop board D101GGC, including the Technical Product Specification (TPS), BIOS updates, and device drivers, go to: http://support.intel.com/support/motherboards/desktop/...

  • Page 10: Supported Operating Systems

    Intel Desktop Board D101GGC Product Guide Supported Operating Systems The desktop board supports the following operating systems: • Microsoft Windows* XP Media Center Edition 2005 • Microsoft Windows XP Professional • Microsoft Windows XP Professional x64 Edition • Microsoft Windows XP Home •...

  • Page 11: Desktop Board Components

    Desktop Board Features Desktop Board Components Figure 1 shows the approximate location of the major components on desktop board D101GGC. Line In DIMM 0 DIMM 1 OM18207 Figure 1. Intel Desktop Board D101GGC Components...

  • Page 12: Desktop Boards D101Ggc Components

    Intel Desktop Board D101GGC Product Guide Table 2. Desktop Boards D101GGC Components Label Description PCI bus add-in card connectors Front panel audio header PCI Express* x1 connector PCI Express x16 connector Back panel connectors 12 V processor core voltage connector (2x2)

  • Page 13: Processor

    12V2 rating of 13 A continuous and 16.5 A peak current for 10 ms ATX12V (version 2.0 or greater) compliant power supply Desktop board D101GGC supports an Intel processor in the LGA775 package. Processors are not included with the desktop board and must be purchased separately. The processor connects to the desktop board through the LGA775 socket.

  • Page 14: Ati Radeon* Xpress 200 Chipset

    ATI RADEON XPRESS 200 Chipset • PCI Express x16 connector for graphics expansion Audio Subsystem Desktop board D101GGC includes a flexible 6-channel audio subsystem based on a High Definition Audio interface: The audio subsystem features: • ATI IXP 450 Southbridge •...

  • Page 15: Input/Output (I/O) Controller

    • Configurable EEPROM that contains the MAC address LAN Subsystem Software For LAN software and drivers, refer to the D101GGC link on Intel’s World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2).

  • Page 16: Hi-Speed Usb 2.0 Support

    Intel Desktop Board D101GGC Product Guide OM18208 Figure 2. LAN Connector LEDs Table 4 describes the LED states when the board is powered up and the 10/100 Ethernet LAN subsystem is operating. Table 4. RJ-45 10/100 Ethernet LAN Connector LEDs...

  • Page 17: Enhanced Ide Interface

    Desktop Board Features Enhanced IDE Interface The IDE interface handles the exchange of information between the processor and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside the computer. The interface supports: • Up to four IDE devices (such as hard drives) •...

  • Page 18: Security Passwords

    Intel Desktop Board D101GGC Product Guide Security Passwords The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup and for booting the computer, with the following restrictions: •...

  • Page 19: Fan Connectors

    Desktop Board Features Fan Connectors The desktop board has a 4-pin processor fan header and two 3-pin chassis fan headers. See Figure 20 on page 41 for the location of the fan headers. Suspend to RAM (Instantly Available PC Technology) CAUTIONS For Instantly Available PC technology, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current.

  • Page 20: Wake From Usb

    Intel Desktop Board D101GGC Product Guide OM18209 Figure 3. Location of the Standby Power Indicator Related Links: For more information on standby current requirements for the desktop board, refer to the Technical Product Specification by going to the following link, finding the product, and selecting Product Documentation from the left-hand menu: http://support.intel.com/support/motherboards/desktop/...

  • Page 21: Speaker

    Desktop Board Features Speaker A speaker is mounted on the desktop board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST). Battery A battery on the desktop board keeps the values in CMOS RAM and the clock current when the computer is turned off.
  • Page 22 Intel Desktop Board D101GGC Product Guide...

  • Page 23: Installing And Replacing Desktop Board Components

    2 Installing and Replacing Desktop Board Components This chapter tells you how to: • Install the I/O shield • Install and remove the desktop board • Install and remove a processor and memory • Install and remove a PCI Express x16 card •...

  • Page 24: Installation Precautions

    Intel Desktop Board D101GGC Product Guide Installation Precautions When you install and test the Intel desktop board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies •...

  • Page 25: Installing The I/O Shield

    Installing and Replacing Desktop Board Components Installing the I/O Shield The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal components from dust and foreign objects, and promotes correct airflow within the chassis. Install the I/O shield before installing the desktop board in the chassis.

  • Page 26: Installing And Removing The Desktop Board

    Refer to your chassis manual for instructions on installing and removing the desktop board. Figure 5 shows the location of the mounting screw holes for desktop board D101GGC. OM18211...

  • Page 27: Installing And Removing A Processor

    Installing and Replacing Desktop Board Components Installing and Removing a Processor Instructions on how to install a processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing a processor, make sure the AC power has been removed by unplugging the power cord from the computer;...

  • Page 28: Remove The Protective Socket Cover

    Intel Desktop Board D101GGC Product Guide 4. Remove the plastic protective socket cover from the load plate (see Figure 8, E). Do not discard the protective socket cover. Always replace the socket cover if the processor is removed from the socket.

  • Page 29: Install Processor

    Installing and Replacing Desktop Board Components 6. Hold the processor with your thumb and index fingers oriented as shown in Figure 10. Make sure fingers align to the socket cutouts (see Figure 10, F). Align notches (see Figure 10, G) with the socket see (Figure 10, H).

  • Page 30: Installing The Processor Fan Heat Sink

    Desktop board D101GGC has an integrated processor fan heat sink retention mechanism (RM). For instructions on how to attach the processor fan heat sink to the integrated processor fan heat sink RM, refer to the boxed processor manual or the Intel World Wide Web site at: The Boxed Intel...

  • Page 31: Installing And Removing Memory

    Installing and Replacing Desktop Board Components Installing and Removing Memory NOTE To be fully compliant with all applicable Intel SDRAM memory specifications, the boards require DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC Serial Presence Detect Specification at: http://www.intel.com/technology/memory/ddr/specs/dda18c32_64_128x72ag_a.pdf...

  • Page 32: Installing A Dimm

    Intel Desktop Board D101GGC Product Guide 1. Observe the precautions in "Before You Begin" on page 23. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer’s cover and locate the DIMM sockets (see Figure 14).

  • Page 33: Removing Dimms

    Installing and Replacing Desktop Board Components Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 23. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3.

  • Page 34: Installing And Removing A Pci Express* X16 Card

    Intel Desktop Board D101GGC Product Guide Installing and Removing a PCI Express* x16 Card CAUTION When installing a PCI Express x16 card on the desktop board, ensure that it is fully seated in the PCI Express x16 connector before you power on the system. If the card is not fully seated in the PCI Express connector, an electrical short may result across the PCI Express connector pins.

  • Page 35: Connecting The Ide Cable

    Observe the precautions in "Before You Begin" on page 23. • Attach the cable end with the single connector (blue) to the Intel desktop board (Figure 16). • Attach the cable end with the two closely spaced connectors (gray and black) to the drives.

  • Page 36: Connecting The Serial Ata (Sata) Cable

    Intel Desktop Board D101GGC Product Guide Connecting the Serial ATA (SATA) Cable The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the desktop board. Either end of the cable can be connected to the SATA drive or the connector on the board.

  • Page 37: Connecting Internal Headers

    Installing and Replacing Desktop Board Components Connecting Internal Headers Before connecting cables to the internal headers, observe the precautions in "Before You Begin" on page 23. Figure 18 shows the location of the internal headers. Port1L Port1R Presence# Power (+5 V) Power (+5 V) Port2R Sense1_Ret...

  • Page 38: Installing A Front Panel Audio Solution For High Definition Audio

    Intel Desktop Board D101GGC Product Guide Installing a Front Panel Audio Solution for High Definition Audio Figure 18, D on page 37 shows the location of the yellow front panel audio header. Table 5 shows the pin assignments for the front panel audio header.

  • Page 39: Connecting Hi-Speed Usb 2.0 Headers

    Installing and Replacing Desktop Board Components Connecting Hi-Speed USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 18, A on page 37 for the location of the black USB 2.0 headers. Table 7 shows the pin assignments for the headers.

  • Page 40: Setting Up The Flexible 6-Channel Audio With Jack Re-Tasking (Optional)

    Intel Desktop Board D101GGC Product Guide Setting Up the Flexible 6-Channel Audio with Jack Re-tasking (Optional) After installing the Realtek audio driver, the multi-channel audio feature can be enabled. OM18218 Item Description Rear left/right out or Line In Front left/right out or Line Out Center/LFE (Subwoofer) or Mic In Figure 19.

  • Page 41: Connecting Fan And Power Cables

    Installing and Replacing Desktop Board Components Connecting Fan and Power Cables Connecting Fan Cables Figure 20 shows the location of the fan headers. Connect the processor’s fan heat sink cable to the 4-pin processor fan header on the board. Connect chassis fan cables to the 3-pin fan headers. OM18219 Figure 20.

  • Page 42: Connecting Power Cables

    Intel Desktop Board D101GGC Product Guide Connecting Power Cables CAUTION Failure to use the appropriate power supply and/or not connecting the 12 V (2x2) power connector to the desktop board may result in damage to the board or the system may not function properly.

  • Page 43: Other Connectors

    Figure 22 shows the location of the PCI bus add-in card, PCI Express x1, chassis intrusion, and diskette drive connectors. OM18221 Item Description PCI bus add-in card connector 2 PCI bus add-in card connector 1 PCI Express x1 connector Chassis intrusion connector Diskette drive connector Figure 22. Location of Other Connectors on Desktop Board D101GGC...

  • Page 44: Setting The Bios Configuration Jumper

    Intel Desktop Board D101GGC Product Guide Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

  • Page 45: Clearing Passwords

    Installing and Replacing Desktop Board Components Table 9. Jumper Settings for the BIOS Setup Program Modes Jumper Setting Mode Description Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu.

  • Page 46: Replacing The Battery

    Intel Desktop Board D101GGC Product Guide Replacing the Battery A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery.
  • Page 47 Installing and Replacing Desktop Board Components AVVERTIMENTO Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate, seguire le istruzioni del produttore.
  • Page 48 Intel Desktop Board D101GGC Product Guide AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę...
  • Page 49 Installing and Replacing Desktop Board Components OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху. Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
  • Page 50 Intel Desktop Board D101GGC Product Guide To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 23). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter).

  • Page 51: A Regulatory Compliance

    Product Ecology statements • Electromagnetic Compatibility (EMC) regulations • Product certifications Safety Regulations Desktop board D101GGC complies with the safety regulations stated in Table 10 when correctly installed in a compatible host system. Table 10. Safety Regulations Regulation Title UL 60950-1:2003/ Information Technology Equipment –...

  • Page 52: European Union Declaration Of Conformity Statement

    We, Intel Corporation, declare under our sole responsibility that the product Intel Desktop Board ® D101GGC is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 89/336/EEC (EMC Directive) and Council Directive 73/23/EEC (Safety/Low Voltage Directive).

  • Page 53: Product Ecology Statements

    Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado.
  • Page 54 Intel Desktop Board D101GGC Product Guide Français Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour permettre aux consommateurs de produits Intel de recycler les produits usés en les retournant à des adresses spécifiées.

  • Page 55: Lead-Free Desktop Board

    Regulatory Compliance Türkçe Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin Intel markalı kullanılmış ürünlerini belirlenmiş merkezlere iade edip uygun şekilde geri dönüştürmesini amaçlayan Intel Ürünleri Geri Dönüşüm Programı’nı uygulamaya koymuştur. Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil bütün ayrıntılarını...

  • Page 56: Emc Regulations

    Intel Desktop Board D101GGC Product Guide EMC Regulations Desktop board D101GGC complies with the EMC regulations stated in Table 12 when correctly installed in a compatible host system. Table 12. EMC Regulations Regulation Title FCC Class B Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, Radio Frequency Devices.

  • Page 57: Ensure System Emc Compliance

    Regulatory Compliance Japanese Kanji statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.

  • Page 58: Product Certifications

    Intel Desktop Board D101GGC Product Guide Product Certifications Board-Level Certification Markings Desktop board D101GGC has the product certification markings shown in Table 13: Table 13. Product Certification Markings Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel desktop boards: E210882.

  • Page 59: Chassis And Component Certifications

    Regulatory Compliance Chassis and Component Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used. Agency certification marks on the product are proof of certification. Typical product certifications include: •...
  • Page 60 Intel Desktop Board D101GGC Product Guide...

Table of Contents