Warnings And Important Information - Rinnai DONSR20Z9 Operation & Installation Manual

WARNINGS AND IMPORTANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and to ensure optimum
IMPORTANT
performance.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction,
property damage, water leakage, electric shock, fire, personal injury and/or death.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in personal injury
or death.
WARNINGS: Indicates a potentially hazardous situation which, if not avoided, could result in personal
injury or death.
CAUTIONS: Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury or damage to the appliance. It may also be used to alert against unsafe practices.
ACHIEVING OPTIMAL PERFORMANCE
For optimal performance ensure to use the air conditioner within the following temperature ranges. Using
WARNING
the air conditioner outside of these ranges, will activate certain safety protection features, that will effect
the appliances performance.
Room Temperature
Outdoor Temperature
WARRANTY EXCLUSIONS
Rinnai product warranty excludes faults and failures caused by improper use and abuse; fair wear and
tear; or failure to follow instructions regarding service and maintenance. It is very important that you
maintain your appliance and have it serviced regularly. It is a condition of warranty that you adhere to the
maintenance and service requirements as set out in this manual. Compliance with these requirements
will prolong the useful life of your appliance and help ensure it operates efficiently. The "Service
Maintenance Schedule". specifies specific items to be performed at prescribed intervals by qualified
licensed technicians. The schedule should also be fully completed and retained as a record of who
carried out the service, the date and actions taken.
IMPORTANT: Failure to carry out the requisite maintenance, servicing and recording requirements may
void your product warranty. Please refer to "Warranty" for full details.
MANDATORY INSPECTION PRIOR TO INSTALLATION
Immediately report any damage or discrepancies to the Supplier of the appliance. This appliance was
WARNING
inspected and tested at the time of manufacture and packaging, and released for transportation without
known damage. Upon receipt, inspect the exterior for evidence of rough handling in shipment. Ensure
that the appliance is labelled correctly for the gas and electrical supply, and/or other services it is intended
to be connected to.
For safety and warranty purposes, appliances that may be damaged or incorrect must not be installed
or operated under any circumstances. Installation of damaged or incorrect appliances may contravene
local government regulations. Rinnai disclaims any liability or responsibility whatsoever in relation to the
installation or operation of damaged or incorrect appliances.
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your indoor unit
NOTE
may vary slightly from that which is shown in this manual.
Rinnai
MODE COOL MODE HEAT MODE
17°C ~ 32°C 0°C ~ 30°C
-15°C ~ 50°C -15°C ~ 24°C
4 Ducted Reverse Cycle Inverter Operation Manual