Generating Waveforms Interactively - National Instruments 5401 Getting Started Manual

♦
PCI devices—Configure the RTSI cable by completing the following
steps:
1. Connect a RTSI cable between the PCI devices to physically share
triggers or clocks.
2. In the MAX Configuration tree under Devices and Interfaces,
right-click NI-DAQmx Devices.
3. Select Create New NI-DAQmx Device»RTSI Cable.
4. To add a device to a RTSI cable, right-click on the RTSI cable name
in the Configuration tree and select Add Device to RTSI Cable.

9. Generating Waveforms Interactively

You can interactively generate arbitrary and standard function waveforms
using the FGEN SFP. NI 5431 users can use the NI Composite Video
Generator in LabVIEW to interactively generate video signals.
© National Instruments Corporation
Figure 4. The FGEN Soft Front Panel
15 NI SIgnal Generators Getting Started Guide