Installing Pci Devices - National Instruments 5401 Getting Started Manual

Installing PCI Devices

To install the PCI device, complete the following steps:
1. Power off and unplug the PC.
2. Remove the PC cover.
3. Insert the device into an open PCI slot, as shown in Figure 3.
1 NI PCI Device
To maximize airflow and extend the life of the device, leave
Tip
any adjacent PCI slots empty.
NI SIgnal Generators Getting Started Guide
2
1
2 PCI Slot
Figure 3. PCI Installation
3
3 Computer Chassis
10 ni.com