Table of Contents
Advertisement
Data exchange between PDA & Machine
Using the One Touch Command
•
Get setup - Allows the service person to "clone"
a machine. For example, if a control board
needed to be replaced on a machine, the service
person could clone the setup data from an
existing machine in order to copy the current
template to the new control board.
Important:
All machine usage history will be lost at time of control
board replacement. See Service Tech Manual/Job Aid
for details.
•
Re-program - Used only when a machine
software (firmware) upgrade is required.
Instructions for re-programming will be provided
when new machine software (firmware) is
available.
The final option on the Select a command screen is
One Touch . This command performs two common
commands with a single tap of the stylus:
•
Audit data is uploaded to the Palm
from the machine.
•
The correct time and date are set on the
machine, according to the time and date on the
PDA.
™
handheld
46
Advertisement
Table of Contents
