Installation Requirements; Tools And Parts; Location Requirements - Whirlpool W10200890B Installation Instructions Manual

INsTaLLaTION reQUIreMeNTs

TOOLS AND PARTS

Gather required tools and parts before starting installation.
Tools needed:
Adjustable or open end
wrench / " (14 mm)
9
16
4" min
(102 mm)
Wood block
Pliers that open to 1 ⁄ "
9
16
(39.5 mm)
Optional tools:
Flashlight
Parts supplied:
NOTE: All parts supplied for installation are in
washer basket.
Beaded Tie Strap
Drain hose form
2
Level
Ruler or measuring tape
Bucket
Front leveling feet with
jam nuts (2)
Parts needed:
(Not supplied with washer)
Inlet hoses with flat washers
To order, please refer to the phone number or website on back page
of your Washer User Instructions.
8212656RP 10 ft. (3.0 m) Inlet hose, Black EPDM (2 pack)
n
8212641RP 5 ft. (1.5 m) Inlet hose, Black EPDM (2 pack)
n
8212646RP 4 ft. (1.2 m) Inlet hose, Black EPDM (2 pack)
n
8212545RP 5 ft. (1.5 m) Inlet hose, Red and Blue EPDM
n
(2 pack)
8212487RP 5 ft. (1.5 m) Nylon braided inlet hose (2 pack)
n
8212638RP 6 ft. (1.8 m) Nylon braided inlet hose, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
8212637RP 6 ft. (1.8 m) Inlet hose, Black EPDM, space
n
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts:
(Not supplied with washer)
Your installation may require additional parts. To order, please
refer to the phone number or website on the back page of your
Washer User Instructions.
If you have:
Overhead sewer
Short drain hose
1" (25 mm)
diameter standpipe
Lint clogged drain
Floor drain

LOCaTION reQUIreMeNTs

Select proper location for your
washer to improve performance
and minimize noise and possible
"washer walk". Install your
washer in a basement, laundry
room, closet, or recessed area.
You will need:
Standard 20 gal. (76 L) 39"
(991 mm) tall drain tub or utility
sink, sump pump, and connectors
(available from local suppliers)
Drain Extension Kit Part Number 49022
2" (51 mm) diameter to 1" (25 mm) diameter
Standpipe Adapter Kit, Part Number 40923
Connector Kit, Part Number 285835
Drain protector, Part Number 376031
Siphon Break Kit, Part Number 280129A
Drain Hose, Part Number 285702
Connector Kit, Part Number 285835
27"
(686 mm)
42"
(1067 mm)
25 / "
1
2
(648 mm)