Panasonic FZ-G1 Series Operating Instructions - Basic Manual page 8

First-time Operation
8
5 <For MUI OS model>
Select language and OS (32-bit or 64-bit).
CAUTION
l Carefully choose your language because you cannot change
it later. If you set a wrong language, you need to reinstall
Windows.
NOTE
l You can operate with the Tablet Buttons. Follow the
instructions.
: ↑
: ↓
: Enter key
: Tab key
A Select language and OS (32-bit or 64-bit) on "Select OS"
screen and touch [OK].
The language setting will start by touching [OK] on the confir-
mation screen.
The language and OS setting will be completed in about 15
minutes.
B When termination screen is displayed, touch [OK] to turn off
the computer.
C Turn on the computer.
6 Setup Windows.
Select language and touch [Next].
Turn on the computer.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the screen
or tablet buttons, and wait until the drive indicator
turned off.
l After the computer is turned on, the screen remains black or
unchanged for a while, but this is not a malfunction. Wait for
a moment until the Windows setup screen appears.
l Setup of Windows will take approximately
5 minutes /
Go to the next step, confirming each message on the display.
Follow the steps below.
l
A When "Enable sensors" is displayed, touch [Enable this
sensor].
B When the [User Account Control] screen is displayed,
touch [Yes].
C A t the [Display Rotation Tool] confirmation screen, touch
[Yes].
The computer restarts automatically, and the setting is en-
abled.
20 minutes.
has