Panasonic FZ-G1 Series Operating Instructions - Basic Manual page 26

Troubleshooting (Basic)
n Starting Up
The date and time are
incorrect.
[Executing Battery
Recalibration] screen
appears.
[Enter Password] does
not appear when resum-
ing from sleep/hiberna-
tion.
26
l Make the correct settings.
A Open the Control Panel.
1. Perform either of the following procedures.
Ÿ Touch and hold
screen.
Ÿ Flick from the middle of the Start screen to the top.
2. Touch [Control Panel].
Touch (Start) - [Control Panel].
B Touch [Clock, Language, and Region] - [Date and Time].
l If the problem persists, the internal clock battery may need to be
replaced. Contact Panasonic Technical Support.
l When the computer is connected to LAN, check the date and time
of the server.
l The 2100 A.D. or later year will not be correctly recognized on this
computer.
l The Battery Recalibration was canceled before Windows was shut
down last time. To start up Windows, turn off the computer by the
power switch, and then turn on.
l Select [Enabled] in [Password On Resume] in the [Security] menu
of the Setup Utility (è
l The Windows password can be used instead of the password set
in the Setup Utility.
A Add a password.
1. Display "Charm" and touch
counts].
2. Touch [Sign-in options], and touch [Add] under "Password".
1. Touch (Start) - [Control Panel].
2. Touch [User Accounts and Family Safety] - [Add or remove user
accounts].
B Set up the following.
1. Open the Control Panel, touch [System and Security] - [Power
Options] - [Require a password on wakeup].
2. Add a check mark for [Require a password].
1. Touch [Control Panel] - [System and Security] - [Power Option] -
[Require a password when the computer wakes] and add a check
mark for [Require a password].
at the bottom left corner of the Desktop
Reference Manual "Setup Utility").
- [Change PC settings] - [Ac-