Game Demonstration (Ml401/Ml402/Ml405) - Xilinx ML40 Series Getting Started Tutorial

ML40x Demonstrations in Platform Flash

Game Demonstration (ML401/ML402/ML405)

Location
ML401/ML405: Platform Flash configuration address 1.
ML402: Platform Flash configuration address 0.
ML403: Not present.
Description
This demonstration implements the Simon game using the North-East-South-West-Center
directional buttons (GPIO_SW_N, GPIO_SW_E...) and LEDs on the board. Messages are
displayed on the character LCD.
Setup
1.
2.
Instructions
At the beginning of the game, all the LEDs blink rapidly.
1.
2.
3.
4.
32
Set the three leftmost configuration address DIP switches to the binary value 001.
Press the Prog button to run the demonstration.
Press any button to start the game.
In each round, the LEDs blink in a given sequence. The player must press the buttons
to repeat the sequence corresponding to the order in which the LEDs blinked.
Correctly repeating the sequence gives the player one point, and a new round is
started. Each sequence becomes increasingly complex.
If a mistake is made, the score resets to 0 on the screen, and all the LEDs blink rapidly
to signify a new game.
www.xilinx.com ML40x Getting Started Tutorial
UG083 (v5.0) June 30, 2006
R