Complete Installation Checklist - Whirlpool NTW5100TQ Installation Instructions Manual

19.
Tighten leveling feet
When washer is level, use a 9/16" or 14 mm open-end or
adjustable wrench to turn jam nuts counterclockwise on feet
tightly against washer cabinet.
HELPFUL TIP:
You may want to prop washer again with
wooden block.
20.
Plug into a grounded
3 prong outlet
8
COMpLeTe INsTaLLaTION
CheCKLIsT
q
Check electrical requirements. Be sure you have correct
electrical supply and recommended grounding method.
q
Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
q
Check that you have all of your tools.
q
Check that yellow shipping materials were completely
removed from back of washer.
q
Check that water faucets are on.
q
Check for leaks around faucets and inlet hoses.
q
Remove protective film from console and any tape
remaining on washer.
q
Check that washer is plugged into a grounded
3 prong outlet.
q
Dispose of/recycle all packaging materials.
q
Read "Washer Use" in your Washer User Instructions.
q
To test and clean your washer, measure 1/2 of normal
recommended amount of powdered or liquid detergent
and pour it into washer basket or detergent dispenser
(on some models). Close lid. Select any cycle. Start washer
and allow to complete full cycle.