# imgaddr=0x84000000 source $imgaddr:script && reset
4.5.5 AP1201
Procedure of UBoot upgrading:
✓ To setup a TFTP server on a PC, and put the images on the TFTP server path:
OAW-AP1201-uboot_1.x.bin
✓ To enter the bootloader during AP initialization, which is described in 4.4.1.
Example: IP address=172.16.18.11; TFTP Server Address=172.16.18.129
# set ipaddr 172.16.18.11
# set serverip 172.16.18.129
✓ UBoot Upgrading
# tftpboot 0x84000000 OAW-AP1201-uboot_1.0.bin
# imgaddr=0x84000000 source $imgaddr:script
# reset
Stellar AP | Deployment & Configuration & Troubleshooting Guide
P a g e
42 |