How Do I Edit My Routes And Tracks - Raymarine C-Series Reference Manual

Chapter 4: Using the Chart
2. Press CREATE ROUTE FROM TRACK again.
The system generates the route, displays the maximum deviation from the
recorded track and asks if you want to give the route a name of your choosing.
3. Press:
• YES to assign this route a name of your choice. (see
or color of a route or track?
Or:
• NO to assign this route a default name.
...from a saved track?
You can create a route from a track that you have already saved:
TRACKS...
1. Move the cursor over the appropriate track or highlight it on the track list.
2. Press CREATE ROUTE FROM TRACK.
The system generates the route, displays the maximum deviation from the
recorded track and asks if you want to give the route a name of your choosing.
3. Press:
• YES to assign this route a name of your choice (see
or color of a route or track?
Or:
• NO to assign this route a default name.

4.10 How do I edit my routes and tracks?

Once you have created a route or track, it can be edited in a variety of ways. You can:
• Reverse a route (see
• Amend the course of a route (see
• Change the name of a route or track (see
• Change the color of a route or track (see
• Erase a route or track (see
For a route or track to be edited it must first be selected
An active route can be edited, with the exception of the target waypoint. If a
Note:
waypoint being edited becomes the target, then the system shall cancel the edit; the
waypoint shall remain in its original position.
page 26
on ).
CREATE ROUTE
FROM TRACK...
page 26
on ).
page 23
)
page 23
).
page 26
page 26
page 27
).
How do I change the name
CREATE ROUTE
FROM TRACK
How do I change the name
).
).
4-21