Static Routing - TP-Link Archer C24 User Manual

Chapter 4
7. If your service provider is NO-IP, select
name is bound to the WAN IP of this router.
8. Click LOGIN AND SAVE.
4 2 8

Static Routing

Static Routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
I want to:
Visit multiple networks and servers at the same time.
For example, in a small office, my PC can surf the internet through Router A, but I also
want to visit my company's network. Now I have a switch and Router B. I connect the
devices as shown in the following figure so that the physical connection between my
PC and my company's server is established. To surf the internet and visit my company's
network at the same time, I need to configure the static routing.
How can I do that?
1 Change the routers' LAN IP addresses to two different IP addresses on the same
subnet. Disable Router B's DHCP function.
2 Visit http://tplinkwifi.net, and log in with the password you set for Router A.
3 Go to Advanced
4 Click Add and finish the settings according to the following explanations:
Router A
LAN: 192.168.0.1
192.168.0.100
> Network > Routing
Configure the Router in Wireless Router Mode
WAN IP binding to ensure that the domain
Router B
WAN: 172.30.30.100
LAN: 192.168.0.2
Switch
PC
and locate the Static Routing
Company's server
172.30.30.1
section.
30