System Log - TP-Link Archer C24 User Manual

Chapter 4
• The router's WAN IP is usually a dynamic IP. Please refer to
a domain name.
• Allow a specific device to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTP port as default setting (recommended) or enter a value between 1024
and 65535.
3. Select Specified Device
4. In the Only this IP Address
the router.
5. Click SAVE.
Devices using this WAN IP can manage the router by logging in to
IP:port number (such as http://113.116.60.229:1024).
Tips: The router's WAN IP is usually a dynamic IP. Please refer to
through a domain name.
4 10 6

System Log

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
Remote Management.
for Remote Managers.
field, enter the IP address of the remote device to manage
System > System Log, and you can view the logs of the router.
Configure the Router in Wireless Router Mode
Dynamic DNS if you want to log in to the router through
Dynamic DNS if you want to log in to the router
http://Router's WAN
59