Information Screens - Graco XM PFP Setup & Operation

Information Screens

Use this screen to view alarm diagnostic information,
alarm logs, and pump batch and grand totals. These
screens also enable users to view maintenance
information for pump and check valves, including the
maintenance schedule.
If the potlife timer is enabled, the Flush Confirm
icon displays.
Alarm
The Alarm screen displays the specific alarm code.
There are two levels of error codes: alarms and
advisories. A solid bell icon with an exclamation point
and three audible alerts indicate a alarm. And an
outlined hollow bell icon and a single audible alert
indicate an advisory.
Additionally, this screen displays the location of the error
with the top view and side view of the system. Refer to
the following table and subsections for more details
The first number below the alarm code is the main
power supply voltage used by the electronic modules.
The voltage should read between 23 VDC - 25 VDC for
non-hazardous location systems, and 10-14 VDC for the
hazardous location systems.
The second number below the alarm code is the power
supply voltage used by the system sensors. This
voltage should read between 4.9-5.1 VDC.
The third number below the alarm code is the A side
pump dosing size. This value is displayed in volumes of
cubic centimeters (cc) and is the volume pumped on the
A side when the B side dosing valve is off. Optimizing
the restriction of the system will keep this value small
and ensure material is mixed well.
3A2776K
Appendix A - User Interface Display
Icon Function
Go to Alarm log. Use up and down arrows
to scroll through list of the past 16 errors.
Go to totalizer screen. Allows users to view
the grand and batch totals for each pump
and both pumps combined.
Go to maintenance screen. Allows user to
view maintenance information.See
Maintenance Setup 2, page 73.
Flush confirm. Use when the potlife timer is
enabled. Press button to confirm flush
before a potlife advisory is issued.
Amount of material moved through pump
that will result in a maintenance warning.
Amount of material moved through dosing
valve that will result in a maintenance
warning.
Number of days between maintenance
cycles that will result in a reminder
advisory.
Clear batch totalizers or maintenance
counters.
Alarm Log
Use this screen view details regarding alarms received,
including the date, time, and alarm code for the last 16
alarms. Up to four pages of alarms are available.
Press to access the alarm log. The press
to scroll through each page of alarms.
and
81