Operating The Plough With Depth Control Stops - Grizzly Field Boss Folding Wing Manual

10 Operating Instructions
10:6 Operating the Plough with
Depth Control Stops
Adjustable depth stops can be fitted to the
master cylinder (the right side of the machine)
for accurate depth settings when operating.
Proper care must be taken when altering
depth stops.
When adjusting depth stops:
• Make sure the plate grooves are clean
and free of dirt to ensure proper meshing
of grooves.
• Two depth stop plates must be fitted to
one cylinder, there is no advantage fitting
depth stop plates to two cylinders or more.
• Grooves must be properly aligned so
that both plates contact the cylinder
end equally. Inaccurate alignment will
cause damage to the depth stops and/or
cylinders. This is not covered by warranty.
June 2018
When adjusting depth stops make sure groove and
plates are clean and properly aligned, use loctite
243 on bolts.
Specifications are subject to change without prior notification
Depth Stops
IMPORTANT!
Depth control stops can be
damaged if they are incorrectly
fitted.
Depth stops must be fitted to
the right hand cylinder only and
aligned to contact the cylinder
evenly.
31