Warranty Policy - Grizzly Field Boss Folding Wing Manual

7 Warranty Policy

Grizzly Engineering Pty. Ltd. (Grizzly) warrants to its Authorised Dealer, who in turn, warrants to the original purchaser (Owner) that each new Grizzly
product, part or accessory will be free from proven defects in material and workmanship for twelve (12) months after delivery and installation by an
Authorised Grizzly Dealer, according to the conditions outlined.
This warranty does not cover damages resulting from abuse, accidents, alterations, normal wear or failure to maintain or use the Grizzly product with
due care.
During the warranty period, the Authorised Grizzly Dealer shall repair or replace, at Grizzly's option, without charge for parts and labour any part of the
Grizzly product which fails during normal use and operation because of defects in material or workmanship. The Owner must provide the Authorised
Dealer with prompt written notice of the defect (within 14 days of its occurrence), and allow reasonable time for replacement or repair. The Authorised
Dealer must provide Grizzly written notice and photos if required, within 14 days of receiving notice of the defect by the customer.
Grizzly (at its option) may request failed parts to be returned to the factory. Any travel time of a service technician and/or transportation of the Grizzly
product to the Authorised Servicing Dealer for warranty work is the responsibility of the Owner.
This warranty is in lieu of all other warranties (except those of title), expressed or implied, and there are no warranties of merchantability or
fitness for a particular purpose. In no event shall the Authorised selling Dealer or Grizzly be liable for downtime expenses, loss of machine
use, loss of crops, loss of profits, injury or damage arising from accident, direct or indirect loss, or other incidental, consequential or
special damages.
Conditions of Warranty
1) The warranty is not transferable to any third party or subsequent purchaser, unless approved with Grizzly Management.
2) The Installation & Warranty Registration Form (see page 6) must be filled in and returned to Grizzly by the Dealer within seven (7) days of
delivery and installation of the unit. By signing the Installation & Warranty Registration Form, the owner acknowledges full responsibility for the
safe operation of the Plough and undertakes to fully train any person that might operate the machine. Only when the Installation and Warranty
Registration is completed and returned, can Grizzly fulfil all warranty obligations.
3) Components and conditions not covered by warranty include:
• Abuse
• Environmental Conditions
• Normal Wear
• Maintenance
14
Failure resulting from neglect, such as improper operation, lack of required maintenance or continued use of a
machine after the discovery of a defect which results in greater damage to the unit.
Deteriorated or failed components such as hydraulic hoses, seals, valves or connections damaged by corrosive
materials, dirt, sand, excessive heat or moisture.
Warranty determination for these types of failures will be made by Grizzly only after inspection of failed
components.
Normal wear and consumable items such as oils and lubricants, nuts, bolts, washers, grease caps, spanners,
jacks, bearing housing, axles, poppet valves or seal kits for hydraulic cylinders, seals, discs, axles, tyres, machine
adjustment and periodic service. These are considered to be normal wear items and are not warranted.
Component failure caused by non performance of scheduled maintenance such as correct lubrication and
maintenance, tightening or replacement of bolts, nuts, fittings, shields and covers.
Specifications are subject to change without prior notification
From serial number 6714
Including 6586, 6666, 6703