Operating Via The Control Board - Siemens SINAMICS G Series Manual

6 Operating the application example
Table 6-5: Buttons in the support information
Operation
6.2

Operating via the control board

You can also use the application example without an HMI. The watch table
"ControlSinaSpeed" has already been created in the project. The tags you can
monitor or control are the same which are also displayed at the operator panel.
Figure 6-7: "ControlSinaSpeed" control panel
Drehzahlachse mit SINA_SPEED
Entry-ID: 109485727, V1.0,
Activating the start screen
Activating the previous screen
Switch language to German
Switch language to English
06/2017
Action
29